Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
Program Config (Audio)
Audio Tracking Mode
Pair Config (Audio)
Audio Pair
Pair Word Length
Channel Config (Audio)
Audio Channel
Channel Gain
Channel Invert
Channel Mute
Channel Format
Channel Delay
© 2019 Imagine Communications Corp.
This parameter makes it possible to independently delay the audio track
separately from the video track, typically to correct delays added by other
equipment or processing paths. Options are:
• Off: Disables the Audio Tracking feature
• Frame Sync: Adds delay from teh video frame synchronization, plus
delay added by the H-Phase and V-Phase parameters
• Frame Sync + Delay: Adds delay from the video frame synchronization
plus delay added by the H-Phase, V-Phase, and Frame Delay parameters
Choose a pair to configure. Options are 1 - 8. The following parameter will
only affect the selected pair.
Adjusts the sample resolution for that audio pair, options are:
•
24 bits (default)
•
20 bits
•
16 bits
Selects the audio channel, from 1 - 16. The rest of the controls on this page
will then adjust that channel.
Adjusts the gain of the selected audio channel.
Inverts the selected audio channel to correct for phase error.
Enables muting for the selected audio channel.
Determines the format for the selected audio channel. Options include:
•
Auto
•
ST2110-30 (PCM)
Determines the amount of delay to apply to the specified audio channel,
with a range from 0 - 1000 ms.
This parameter is unavailable when in Low Latency mode. See
Mode
(on page 89).
Proprietary and Confidential.
Configuring Programs
Low Latency
May 2019 | Page 115
Advertisement
Table of Contents
