Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
Main and Proxy Processing Paths When using Pixel Interleave Output Formats
Main and Proxy Processing Paths When using Square Division Output Format
In addition, when the license key SNP-SK-HDR is enabled for this program, HDR color conversion is
available on the proxy.
Configuring for 12G UHD
When using 12G UHD as your input source, if the video channel/section supports UHD input on BNC, you
can configure the first BNC (SDI In) for either 12G or 3G/HD. If you select the 12G option, the channel
will receive the UHD stream as a 12G signal from the first BNC connector and all other three BNC inputs
will be ignored. If the 3G/HD option is selected, the channel will receive the UHD stream as a Quad-Link
from all four BNC connectors.
When using 12G UHD as your input source, if the video channel/section supports UHD output on BNC,
you can configure the first BNC (SDI Out) for either 12G or 3G/HD. If the 12G option is selected, the
channel will output the UHD stream on the first BNC connector only as a 12G signal. If the 3G/HD option
is selected, the channel will output the UHD stream on all 4 BNC connectors as a Quad-Link (2SI or SQD).
12G specific settings appear in the following areas of the interface:
•
For input 12G UHD, Video Configuration (on page 104)
•
For output 12G UHD, SDI (Output Tab) (on page 116)
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
Configuring Processors
May 2019 | Page 92
Advertisement
Table of Contents
