Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
Note: When in 2022-6 mode, due to a bandwidth routing limitation, do not configure more than six
channels in a Processor to receive at 1080p/50 or 1080p/59, or the switch mode will revert to Make
After Break mode resulting in non-clean switches.
Configuring a Personality
SNP has multiple personalities, as described in the following sections. Personalities are determined on a
per-processor basis.
To change the personality on a Processor, follow these steps:
1. On the Dashboard, with an element selected, click the Edit button for a Processor.
2. On the Configure Processor dialog box, choose the Personality tab.
Personality
FPGA Status
3. When you are done making your selections, click Apply Personality.
4. Reboot your SNP.
The FPGA Status field displays Loading until the change is complete.
The number of supported channels will depend on the personality assigned to a processor, as described
in the following table:
Personality
Synchronizer
© 2019 Imagine Communications Corp.
• Conversion
• Remap
• Sync
(read-only)
Per Processor
• 8 x HD
• 4 x HD + 1 x UHD
• 2 x UHD
Proprietary and Confidential.
Configuring Processors
Maximum per SNP
• 32 x HD
• 16 x HD + 4 x UHD
• 24 x HD + 2 x UHD
• 8 x UHD
• others
May 2019 | Page 80
Advertisement
Table of Contents
