Menu Setting; Short Key; Menu Knob; F1-F2 Buttons - Lilliput Q17 User Manual

3. Menu Setting

Before setting the functions, please make sure the device is connected correctly.
3.1 Shortcut keys

3.1.1 Menu Knob

 Power on the monitor, press Menu Knob to display OSD, and select options as the following sequence
via rotating it: PICTURE/MARKER/FUNCTION/WAVEFORM/AUDIO/REMOTE/SYSTEM.
 Press Menu Knob to enter the desired function, rotate it to change the value/option, and press Menu
Knob or Exit again to confirm the changes.
 Functions of Menu Knob can be customized: [Back Light], [Brightness], [Contrast], [Saturation], [Tint],
[Sharpness], [Volume], [Peaking Level]. After setting the Knob's customized function, rotating it can
display the function, and rotating it again can adjust the value. Press it to switch to the next option in
turn. Default option: [Back Light].

3.1.2 F1-F2 Buttons:

 Long press any F1-F2 buttons for 3-5 seconds to pop up shortcut menu on the
screen. As shown in Figure. Select option via rotating the Menu Knob, and set it as
default via pressing the Knob, then press Exit button to exit shortcut setting menu.
The customized function will be remembered by F1/F2 buttons.
 Functions of F1-F2 buttons can also be customized: [Center Marker], [Aspect
Marker], [Safety Marker], [Overscan], [Scan], [Aspect], [Color Space], [Gamma],
[Camera Log], [Check Field], [H/V Delay], [Freeze], [Image Flip], [Color Bar],,
[Peaking], [False Color], [Exposure], [Histogram], [Waveform], [TimeCode], [Mute],
[Level Meter], and [Audio Vector].
 Default function: F1: [Waveform] F2: [Color Space].
8