Lilliput Q17 User Manual page 26

 Fan
Option: [Auto], [On], [Off]. Default: [Auto].
- [Auto]: The monitor will automatically turn on/off the fan according to the setting value of fan auto
temp.
 Knob
Customized Knob function, custom option: [Brightness], [Contrast], [Saturation], [Tint], [Sharpness],
[Volume], [Peaking Level], and [Back light]. Default: [Back Light]. Please refer to 3.1.1 for Knob specific
operation instructions.
 Color Calibration
Select [On] or [Off].
If the device needs to be calibrated color, please operate as following:
 Connect the device with the PC via HDMI interface.
 Make sure the device and color calibration equipment to work more than 30 minutes.
 After the previous step, activate the Color Calibration function of the device and color calibration
software to calibrate the color (See the document "CMS Color Calibration Process" for details).
 It will generate a document "Rec709.cube" after calibrated, then copy this document to USB flash
disk.
 Insert the USB flash disk to the device and save the document. This document "Rec709.cube" will
be found under Color Space Option.
 Comparison En
Use this setting to activate or deactivate the Comparison En function.
When activated, the screen displays the comparison of Original image and customized image, as
shown,
25