3.2.6 REMOTE
DHCP
- [On]: The monitor will automatically get an IP address from network for remote control via various
programs.
- [Off]: Manually configure IP address.
IP Address
Manually configure IP address: xxx.xxx.xxx.xxx
Note: When [DHCP] on, IP address cannot be manually set .
Sub. Mask
Manually configure Sub. Mask: xxx.xxx.xxx.xxx
Note: When [DHCP] on, Sub. Mask cannot be manually set .
Gateway
Manually configure Gateway: xxx.xxx.xxx.xxx
Note: When [DHCP] on, Gateway cannot be manually set .
RS Type
Select RS type: [Default], [TSL V3.1].
Default software connection as below,
20