Lilliput Q17 User Manual page 35

 Function
 Port Selection: Select the specific connection port according to the device interface and click "LAN"
or "RS422" to switch. When RS422 selected, it needs to further set the COM name and baud rate.
For baud rate, it needs to be adapted to the baud rate of the connected device.
 Device Search: Click "Refresh" button to search devices after configuring the port. There are all of
the found devices in the device list after a successful search.
 Screen Choice: The "Screen" shows the number of the screens for the current device. For the
device with multiple screens, use left mouse button to click the screen icon to select the
corresponding screen for operation; use right mouse button to click the screen icon to copy the
screen.
 Device Control: Click the icons of "Picture", "Marker", "Function", "Source", "Audio" and "UMD" to
switch the control page of the corresponding function.
 Activate "All": Simultaneously control all of the devices in the device list if there is two or more
devices with the same model after activating "All".
 Device Copy Function: If there are two or more devices with the same model in the device list,
click one of them and click "Copy" button to copy the source device, and then click the target
device and click "Paste" button to copy the configuration of the source device to the target one.
34