Table of Contents
Advertisement
Menu Setting
2.
Before setting the functions, please make sure the device is connected correctly.
2.1 Shortcut keys
2.1.1 Function Menu
Under non menu screen, press < or > buttons to activate function bar, and then press the "MENU"
button can activate the shortcut menu bar to select brightness, contrast, saturation, tint, sharpness,
volume, back light.
Use the < or > button to adjust the value.
Default function is [Back Light].
2.1.2 F1-F2-F3 Buttons:
Long press any F1-F2-F3 buttons for 3-5 seconds to pop up shortcut menu on the
screen. As shown in Figure. Select option via < and > key, and set it as default via
pressing the Menu button, then press Exit button to exit shortcut setting menu.
Functions of F1-F2-F3 buttons can also be customized: [Center Marker], [Aspect
Marker], [Safety Marker], [Overscan], [Scan], [Aspect], [Anamorphic], [Camera Log],
[Check Field], [H/V Delay], [Freeze], [Image Flip], [Color Bar], [Peaking], [False
Color], [Exposure], [Histogram], [Waveform], [Vector], [TimeCode], [Mute], [ Lever
Meter]. (TimeCode only available on SDI mode.)
Default function:
F1: [Scan]
F2: [Waveform].
F3: [Aspect]
5
Advertisement
Table of Contents
