Function - Lilliput Q17 User Manual

 Aspect Mat.
When activated, it can be selected from 1-7 (Step value is 1).
 Thickness
Adjust the thickness of all the marker lines from 1-7 (Step value is 1).
 User Marker
H1/H2: Adjust the position of vertical markers from 1 to 1920.
V1/V2: Adjust the position of horizontal markers from 1 to 1080.
Note: User maker only in [Aspect Maker]- [User] mode available.

3.2.3 FUNCTION

 Scan
Adjust the scan mode among [Aspect], [Pixel To Pixel], [Zoom].
Note: Aspect and overscan functions only can be adjusted only under [Aspect] mode. Both of them
cannot be adjusted in [Zoom] and [Pixel To Pixel] modes.
 Aspect
Select the aspect of the image among [Full], [16:9], [1.85:1], [2.35:1], [4:3], [3:2], [2.0X], [2.0X MAG].
SDI Mode HDMI Mode
13