Menu Settings; User-Definable Function Buttons; Menu And ▷ / ◁ Buttons - Lilliput PVM220S User Manual

21.5” live stream quad split multiview monitor

Table of Contents

2. Menu Settings

Press either F1, F2 for 3-5 seconds to bring up the function setting. Press [▷] or [◁] to select the desired

option; Press [MENU] to confirm the option and set it as a shortcut function. Press [EXIT] to close the

function setting.

User settable function buttons to suit individual needs: Center Marker, Aspect Marker, Safety Marker,

overscan, Aspect Ratio, Check Field, Freeze, Peaking, False Color, Exposure, Histogram, Multiview Mode,

Vertical Display, PGM Cut, UMD, Audio Source, Mute, Level Meter.

Note!

F1 default: [Multiview Mode], F2 default: [PGM Cut], [PGM Cut] is only available in shortcut function

2.2 MENU and ▷ / ◁ Buttons

 Turn on the power, press [MENU] to display the OSD; Press [▷] or [◁] to select between Information,

Multiview, UMD, Picture, Marker, Function, Audio and System; Press [MENU] again after selection to enter

Table of Contents