Function - Lilliput PVM210 Manual

2-2-3. FUNCTION

Function
- Scan -
Use this menu option to choose Scan mode. There are three modes preset:
 Aspect
Select Aspect under Scan option, then use Aspect option to switch between several aspect ratio setting. For
example:
In 4:3 mode, images are scaled up or down to fill the maximum 4:3 portion of the screen.
In Full mode, images are scaled to fill the entire screen.
 Pixel to Pixel
The pixel to pixel is a monitor set to 1:1 pixel mapping with native fixed pixels, which avoids loss of
sharpness due to scaling artifacts and normally avoids incorrect aspect ratio due to stretching.
 Zoom
The image can be enlarged by [X1.5], [X2], [X3], [X4] ratios. To select the [Zoom] under [Scan], choose the
times under [Zoom] option which underneath the Check Field option.
Note! Zoom option can ONLY be activated when user select [Zoom] mode under [Scan] function.
- Aspect -
Select the aspect of the image among [Full],[1.85:1], [2.35:1], [4:3], [3:2].
Scan Aspect, Pixel To Pixel, Zoom
Aspect Full, 1.85:1, 2.35:1, 4:3, 3:2
Display Scan Fullscan, Overscan, Underscan
Check Field OFF, Mono, Red, Green, Blue
Zoom X1.5, X2, X3, X4
Freeze OFF, ON
11