3.6.2
Starting the engine
3.6.3
Starting the engine with jump leads
Concerning your safety – Start-up procedure
The machine must only be started and oper-
ated from the driver's seat.
Before starting and moving the machine, make
sure that there is nobody in the danger zone.
To start, set all control levers to "neutral posi-
tion".
Do not use any starting aids like start pilot or
ether.
The machine must not be operated with dam-
aged, missing or non-functional safety installa-
tions.
After starting check all display instruments.
Do not inhale exhaust fumes, because they
contain toxic substances, which could cause
damage to health, unconsciousness or even
death.
For operation in closed or partly closed rooms
ensure adequate ventilation.
Connect positive with positive and negative
with negative (ground cable) – always connect
the ground strap last and disconnect it first! A
wrong connection will cause severe damage in
the electric system.
Do not start the engine by shorting the electric
terminals on the starter motor, because the
machine may start to drive immediately.
BW 138 AD-5
45