Parking The Machine - Fayat Group Bomag BW 138 AD-5 Operating Instruction, Maintenance Instruction

Concerning your safety – Driving the machine; working operation
3.7.7

Parking the machine

Do not step between chip spreader and
machine while the engine is running.
Always empty the chip spreader before
mounting or removing it.
Loads must only be attached and hoisted by an
expert / capable person.
Do not use damaged or in any other way
impaired lashing points.
Use only lifting gear and lifting tackle with suffi-
cient load bearing capacity for the weight to be
loaded.
Fasten the lifting gear only at the specified
lifting points.
Always use appropriate lifting and lashing
means on the lifting and lashing points.
Use lifting and lashing gear only in the pre-
scribed direction of load application.
Lifting tackle must not be damaged by compo-
nents of the chip spreader.
Danger to the life of persons if they step or
stand under a suspended load.
When lifting the machine, avoid uncontrolled
movements of the load. If necessary, hold the
load with guide ropes.
Always stand the chip spreader on level and
firm ground.
Park the machine on horizontal, level, firm
ground.
Before leaving the machine:
n shift all control levers to "Neutral position",
"Off" or "0",
n apply the parking brake,
BW 138 AD-5 49