Start-Up Procedure; Prior To Starting Up - Fayat Group Bomag BW 138 AD-5 Operating Instruction, Maintenance Instruction

Concerning your safety – Start-up procedure
3.6

Start-up procedure

3.6.1

Prior to starting up

44
Use only machines which are serviced at reg-
ular intervals.
Become acquainted with the equipment, the
indicators and control elements, the working
principle of the machine and the working area.
Use your personal protective equipment (hard
hat, safety boots, if necessary also goggles
and ear protection).
Do not take any loose objects with you or
fasten them to the machine.
Before mounting the machine check whether:
persons or obstructions are beside or under
n
the machine,
n the machine is free of oily and combustible
materials,
n all access steps, grips and platforms are free
of obstacles, grease, oils, fuel, dirt, snow
and ice,
n all safety elements are in place,
n all maintenance flaps and doors are closed
and locked.
Use only the intended access steps and grips
to mount the machine.
Before start up, carry out all required visual
inspections and function tests.
If the following tests reveal damages or other
faults, the machine must not be operated, until
these deficiencies have been corrected.
Do not operate the machine with defective indi-
cators and control elements.
BW 138 AD-5