Checks prior to start up – Notes on safety
5.1
Notes on safety
90
If the following tests reveal damages or other
defects, the machine must not be operated,
until these deficiencies have been corrected.
Do not operate the machine with defective indi-
cators and control elements.
Safety installations must not be removed or
made ineffective.
Do not change any fixed settings.
WARNING!
Health hazard caused by fuels
and lubricants!
– Safety regulations and environ-
mental protection regulations
must be followed when handling
fuels and lubricants
3.4 „Handling fuels and lubri-
cants" on page 31.
WARNING!
Danger of injury caused by
rotating parts!
– Before starting work on the
machine make sure that the
engine can not be started.
Park the machine in secured condition
Ä Chapter 6.8 „Parking the machine in secured
condition" on page 121.
Various maintenance flaps and doors must be
opened before performing checks prior to start
up.
Close all maintenance flaps and doors again
once all work is completed.
BW 138 AD-5
Ä Chapter