Draining The Fuel Tank Sludge - Fayat Group Bomag BW 138 AD-5 Operating Instruction, Maintenance Instruction

Maintenance – As required
Fig. 216
Before the next use

8.12.5 Draining the fuel tank sludge

Fig. 217
206
11. Close the drain tap on the water pump
(lever across the flow direction) and route
the water line back into the machine.
12. Unscrew the caps (1) and all nozzles (2)
from all spray tubes and let the water run
out.
1. Reassemble the caps and nozzles on all
spray tubes.
Protective equip-
ment:
1. Park the machine safely
„Parking the machine in secured condi-
tion" on page 121.
2. When performing this work, the fuel tank
shall only hold a small amount of fuel,
pump off if necessary.
3. Unscrew the drain plug and collect leaking
fuel.
4. Screw the drain plug back in with a new
seal ring.
5. Fill the fuel tank with clean fuel.
6. Dispose of fuel in line with environmental
regulations.
B-880-0061
BW 138 AD-5
n Working clothes
n Protective gloves
Ä Chapter 6.8