Yamaha PSR-SX600 Reference Manual page 79

5
Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[8] buttons on the panel, then press the [4 ] (Insert)
button to input the number. The Cursor position can be moved by using the Cursor buttons [E][F].
[3 ]
Replace
[4 ]
Insert
[5 ]
Delete
6
Press the [6 ]/[7 ] (Sequence End) buttons repeatedly to determine how
Registration Sequence behaves when reaching the end of the sequence.
Stop: Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is "stopped."
Top: The sequence starts again at the beginning.
Next Bank: The sequence automatically moves to the beginning of the next Registration Memory Bank in
the same folder.
7
Press the [1 ] (Seq.) button to turn the Registration Sequence function on.
To turn off the Registration Sequence function, press the [1 ] (Seq.) button.
8
Press the [EXIT] button to close the operation display.
After the confirmation message appears, press the [7 ] (Yes) button to store the Registration Sequence
program temporarily.
NOTICE
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you've saved it with the Reg-
istration Memory Bank file. For details of the instructions, see the section below.
7 5
Replaces the number at the cursor position with the currently selected Registration
Memory number.
Inserts the number of the currently selected Registration Memory number to the cursor
position.
Deletes the number at the cursor position.
Indicates the Registration
Memory numbers, in the order
of the current Registration
Sequence.
6
PSR-SX600 Reference Manual
7
79