Editing And Saving Your Original Effect Type - Yamaha PSR-SX600 Reference Manual

Editing and Saving Your Original Effect Type

1
In the Type Select display in the previous section, press one of the [8 ] (Detail)
buttons to call up the display for editing the effect parameters.
2
Use the [2 ]–[4 ] buttons to select a parameter then use the [5 ]/[6 ]
buttons to edit the value.
When Reverb, Chorus, or DSP1 is selected as the Effect Block, you can adjust the Return Level via the
[7 ] (Effect Return Level) button.
3
Press the [8 ] (Save) button to call up the display for the Save operation.
4
Use the [2 ]–[5 ] buttons to select the destination for saving the settings as a
User Effect.
If necessary, change the User Effect name. Press the [6 ] (Rename) button to call up the Character
Entry window, enter the name, and then press the [8 ] (OK) button.
5
Press the [8 ] (OK) button to carry out the Save operation.
6
Press the [EXIT] button to return to the previous display.
The saved User Effect can be selected from the "User" category of the corresponding Effect Block
(page 88).
4
PSR-SX600 Reference Manual
8
89