Yamaha PSR-SX600 Reference Manual page 73

6
Press one of the [3 ]/[4 ] (Rec Start) buttons to enter recording standby status
for the Multi Pad selected in step 4.
7
Play the keyboard to start recording.
To ensure that your recording will be in sync with the tempo, press the [METRONOME] button to turn on
the metronome.
If you want to insert silence before the actual phrase, press the STYLE CONTROL [START/STOP] to
start both the Recording and rhythm playback (of the current Style). Keep in mind that the rhythm part of
the current Style plays back during recording although it is not recorded.
Recommended notes for the Chord Match phrase
If you intend to create a Chord Match phrase, make a phrase using the notes of the original chord (C, E, G,
B) of CM7, and recommended notes (D, A), as shown below. This ensures that the phrase will stay
harmonically constant and match whichever chord you play in the left hand section of the keyboard.
8
Stop recording.
Press one of the [3 ]/[4 ] (Rec Stop) buttons or the panel MULTI PAD CONTROL [STOP]
button or the STYLE CONTROL [START/STOP] button to stop recording when you've finished playing
the phrase.
9
Listen back to your newly recorded phrase, by pressing the appropriate MULTI PAD
button, [1]–[4]. To re-record the phrase, repeat steps 6–8.
10
Press the [5 ]/[6 ] (Repeat/Chord Match) button to call up the Repeat/Chord
Match setting window.
11
Turn the Repeat parameter of each pad On or Off by using the [1 ]–[4 ] buttons.
If the Repeat parameter is on for the selected pad, playback of the corresponding pad will continue until
the MULTI PAD [STOP] button is pressed. When you press a Multi Pad for which Repeat is turned on
during Song or Style playback, playback will start and repeat in sync with the beat.
If the Repeat parameter is off for the selected pad, playback will end automatically as soon as the end of
the phrase is reached.
12
Turn Chord Match of each pad On or Off by using the [5 ]–[8 ] buttons.
If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to
the chord specified in the chord section of the keyboard generated by turning [ACMP] on, or specified in
the LEFT part of the keyboard generated by turning [LEFT] on (when turning the [ACMP] off).
NEXT PAGE
C = Chord note
C R C C R C R = Recommended note
11 12
PSR-SX600 Reference Manual
6
73