Style Assembly (Assembly) - Yamaha PSR-SX600 Reference Manual

Style Assembly (Assembly)

This allows you to copy channel data as a Source Pattern from another preset Style to the currently created
Style. Use this function if you find a favorite rhythm pattern, bass line, chord backing or phrase from another
Style.
The instructions below apply to step 5 of the Basic Procedure on
other settings on the Basic page, carry out the instructions below.
1
If necessary, select the Section to be edited in the Assembly page.
Even if the Section to be edited has already been selected on the Basic page, you can change the Section
also on this page. Press the desired Section button on the panel to call up the Section window, then press
the [8 ] (OK) button to actually enter the selection. If you want to select a fill-in section (which has no
panel button), press any one of the Section buttons and use the [5 ]/[6 ] buttons to select a fill-in,
then press the [8 ] (OK) button.
2
Intro 4 and Ending 4 can be selected on the display then created as your original Style although they are not available on the panel.
2
Replace the Source Pattern of the specific channel with that of another Style.
2-1
Select the desired channel to be replaced via the Cursor buttons [][].
2-2
Press the [ENTER] button to call up the Style Selection display.
2-3
Select the desired Style, then press the [EXIT] button to return to the original display.
2-4
Select the Section and Channel of the selected Style via the [2 ]–[5 ] buttons.
2-5
Confirm the sound with the newly assigned Source Pattern by pressing the STYLE CON-
TROL [START/STOP] button to playback the Style.
NEXT PAGE
40
PSR-SX600 Reference Manual
2-1
2-4
page 35. After selecting a Section and make
2-2
2-3
2-5