On Bass Note Settings For Style Playback Via Midi Receive; Chord Type Settings For Style Playback Via Midi Receive - Yamaha PSR-SX600 Reference Manual

On Bass Note Settings for Style Playback via MIDI Receive

The explanations here apply to the On Bass Note page in step 4 on
the bass note for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to "On" are recognized as the bass note of the chord of Style playback. The bass
note will be detected regardless of the [ACMP] or split point settings. When several channels are
simultaneously set to "ON," the bass note is detected from merged MIDI data received over the channels.
1
Use the Cursor buttons [][] to select the channel.
2
Use the [1 ]–[8 ] buttons to set the desired channel to ON or OFF.
You can also set all channels to OFF by pressing the [-/NO] and the [+/YES] buttons simultaneously.

Chord Type Settings for Style Playback via MIDI Receive

The explanations here apply to the Chord Detect page in step 4 on
MIDI channels over which the MIDI data from the external device will be used to detect the Chord Type for
Style playback. The note on/off messages received at the channel(s) set to "On" are recognized as the notes
for detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord
types will be detected regardless of the [ACMP] or split point settings. When several channels are
simultaneously set to "ON," the chord type is detected from merged MIDI data received over the channels.
9
The operation procedure is basically the same as that of the On Bass Note display above.
104
PSR-SX600 Reference Manual
page 99. These settings let you determine
1
2
page 99. This page lets you select the