Selecting An Effect Type For Each Block - Yamaha PSR-SX600 Reference Manual

Selecting an Effect Type for each Block

1
Use the Cursor buttons [][][E][F] to select the desired item to change the Effect
Type, and then press the [ENTER] button to call up the Effect Type Selection display.
2
Use the [1 ]/[2 ] buttons to select the Effect Block.
Effect
Block
Reverb
Chorus
DSP1
DSP2,
DSP3,
DSP4
DSP5
3
Use the [3 ] buttons to select the Part to which you want to apply the effect.
Note that a Part cannot be selected if "Reverb," "Chorus," or "DSP1" (when the "Connection" parameter is
8
set to "System;" see
selected to be commonly applied to all available Parts.
4
Use the [4 ]/[5 ] buttons to select the Category, and then use the [6 ]/
[7 ] buttons to select the Effect Type.
Note that the Reverb Block has no Categories.
If you want to edit detailed Parameters of the selected Effect Type, press the [8 ] (Detail) button. For
details, refer to the next section.
5
Save the Effect Settings to a Registration Memory, Song or Style.
For instructions, refer to the Owner's Manual, chapter 8.
88
PSR-SX600 Reference Manual
Effect-applicable Effect characteristics
parts
All parts Recreates the warm ambience of playing in a concert hall or jazz club.
All parts Produces a richly textured sound as if several parts are being played simulta-
neously. In addition, other type effects (such as reverb, delay, etc.) can also
be selected in this effect block.
Style Part, In addition to Reverb and Chorus, a wide variety of Effect Types are pro-
Song Channel 1–16 vided, such as Distortion and Wah.
Right1, Right2, Left, In addition to Reverb and Chorus, a wide variety of Effect Types are pro-
Song Channel 1–16 vided, such as Distortion and Wah. For each of DSP2–5, you can select one
of the Parts or Channels listed at left. When you select "Right2" for DSP2,
for example, the DSP2 Effect is applied only to the Right2 part. Note that if
Right1, Right2, Left,
you select a Song or Style which needs the DSP2–5 Blocks, the Part assign-
Song Channel 1–16,
ment of these three Blocks will be changed automatically with last priority
Mic
according to the data.
page 89 for details) is selected. This is because only one of the Effect Types can be