Realtime Recording - Yamaha PSR-SX600 Reference Manual

6
Edit the already recorded Source Pattern (channel data).
• Editing the channel data on the Groove
Lets you change the rhythmic feel, quantizing and velocity, etc.
• Editing the SFF parameters on the Parameter page
Lets you edit the SFF (Style File Format) related parameters of the already recorded channels.
• Editing the rhythm part on the Basic page by using the Drum Setup function
Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.
7
Repeat steps 4–6 as desired.
8
Press the [8 ] (Save) button on any of the pages to save the created Style.
For instructions, refer to "Basic Operations" in the Owner's Manual.
NOTICE
The created Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation.
2

Realtime Recording

In the Basic page, you can record your original rhythm pattern from the keyboard.
Realtime Recording Characteristics in the Style Creator
• Loop Recording
Style playback repeats the rhythm patterns of several measures in a "loop," and Style recording is also done using
loops. For example, if you start recording with a two-measure MAIN section, the two measures are repeatedly
recorded. Notes that you record will play back from the next repetition (loop), letting you record while hearing pre-
viously recorded material.
• Overdub Recording
This method records new material to channel data that already contains recorded data, without deleting the original
data. In Style recording, the recorded data is not deleted, except when using functions such as Rhythm Clear
(page 37) and Delete
is applied only to the Source Pattern of Rhythm 1 and Rhythm 2. For all other Source Patterns, you need to delete
the original data before recording.
 Recording Rhythm Channels 1–2
The procedure below applies to step 5 in the Basic Procedure on
1
In the Basic page, press the [1 ] (Rec Ch) button to call up the Rec Channel
display in the lower half section of the display.
2
Hold down the [1 ] or [2 ] button to select the desired channel as the recording target.
A Rhythm channel can be selected as the recording target no matter whether already recorded data is
included or not. If already recorded data is included in the selected channel, you can record notes
additionally to the existing data.
NEXT PAGE
36
PSR-SX600 Reference Manual
(page
(pages 37, 39). When creating a Style based on an existing internal Style, overdub recording
2
41), and Channel (page 43) pages
(page 44)
page 35.
(page 48)