Yamaha PSR-SX600 Reference Manual page 97

Glide Up
Glide Down
Portamento
Pitch Bend Up*
Pitch Bend Down*
Modulation*
Modulation Alt
Pedal Control (Wah)
Organ Rotary Slow/Fast
Kbd Harmony/Arp On/Off
Arpeggio Hold
Live Control Reset Value
Style Start/Stop
Synchro Start On/Off
Synchro Stop On/Off
Intro1–3
Main A–D
Fill Down
Fill Self
Fill Break
Fill Up
Ending1–3
NEXT PAGE
When the pedal is pressed, the pitch changes, and then returns to normal pitch when the
pedal is released. You can turn this pedal function on or off for each keyboard part on
this display.
Up/Down: Determines whether the pitch change goes up (is raised) or down (is low-
ered).
Range: Determines the range of the pitch change, in semitones.
On Speed: Determines the speed of the pitch change when the pedal is pressed.
Off Speed: Determines the speed of the pitch change when the pedal is released.
The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). The portamento time can also be adjusted
from the Voice Set display (page
keyboard part on this display.
This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices.
Allows you to bend the pitch of notes up or down by using the pedal. You can turn this
pedal function on or off for each keyboard part on this display.
Up/Down: Determines whether the pitch change goes up (is raised) or down (is low-
ered).
Range: Determines the range of the pitch change, in semitones.
Applies modulation effects, such as vibrato, to notes played on the keyboard. You can
turn this pedal function on or off for each keyboard part on this display.
This is a slight variation on Modulation above, in which the effects (waveform) can be
alternately turned on/off by each press of the pedal/footswitch.
Applies the wah effect to notes played on the keyboard when the [DSP] button is turned
on. You can turn this pedal function on or off for each keyboard part on this display.
This parameter is available only when an effect whose category is "Modulation" and
whose type is "Wah" is applied.
Switches the Rotary Speaker speed between "Slow" and "Fast."
This parameter is available only when an effect which contains "Rotary" in its name is
applied.
Same as the [HARMONY/ARPEGGIO] button.
While the pedal is pressed, Arpeggio playback continues even after you release the key-
board, and then Arpeggio stops when the pedal is released. Make sure that any one of
the Arpeggio type is selected and the [HARMONY/ARPEGGIO] button is turned on.
Resets the values of all the assignable functions of Live Control.
Same as the STYLE CONTROL [START/STOP] button.
Same as the [SYNC START] button.
Same as the [SYNC STOP] button.
Same as the INTRO [I]–[III] buttons.
Same as the MAIN VARIATION [A]–[D] buttons.
Plays a fill-in, which is automatically followed by the previous Main section (that of the
button on the immediate left).
Plays a fill-in.
Plays a break.
Plays a fill-in, followed by the next Main section (that of the button on the immediate
right).
Same as the ENDING/rit. [I]–[III] buttons.
14). You can turn this pedal function on or off for each
PSR-SX600 Reference Manual
9
97