Yamaha PSR-SX600 Reference Manual page 17

Hide thumbs Also See for PSR-SX600:
Table of Contents

Advertisement

 Effect Page
1 Reverb Depth/Chorus Depth/DSP Depth/Panel Sustain
[1 ]/
Reverb Depth
[2 ]
[3 ]/
Chorus Depth
[4 ]
[5 ]
DSP On/Off
[6 ]
DSP Depth
[7 ]
Panel Sustain
2 DSP Type
[2 ]/
Category
[3 ]
[4 ]/
Type
[5 ]
[6 ]/
Detail
3 EQ
[1 ]/
Low Frequency
[2 ]
[3 ]
Low Gain
[4 ]/
High Frequency
[5 ]
[6 ]
High Gain
 Harmony/Arp Page
Same as the display called up via [MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F]
Harmony/Arpeggio → [ENTER], with the exception of the following points:
• The parameters set via the [7 ] (Detail) buttons are shown on the top of the display.
• The [8 ] (Compare) and [8 ] (Save) buttons are available (see steps 4–5 on
Adjusts the reverb depth.
Adjusts the chorus depth.
Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on the
panel.
Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the "2 DSP Type" menu
explained below.
Determines the sustain level applied to the edited Voice when the sustain effect is
on. To turn on/off the sustain effect, press the [SUSTAIN] button, or set it from
the display below.
[MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F] Voice Setting →
[ENTER] → TAB [E] Voice Control
Selects the DSP effect category and type. Select a type after selecting a category.
Calls up a detailed setting display. Use the [2 ]–[4 ] buttons to select the
desired parameter, and then use the [5 ]–[6 ] buttons to adjust the value
of the desired parameter. To close the detailed setting display, press the [EXIT]
button.
Determines the desired frequency of the low frequency band to be controlled, over
a range of 32Hz–2.0kHz.
Boosts or attenuates the low EQ band set above over a range of -12dB–12dB.
Determines the desired frequency of the high frequency band to be controlled,
over a range of 500Hz–16kHz.
Boosts or attenuates the high EQ band set above over a range of -12dB–12dB.
page
13).
PSR-SX600 Reference Manual
1
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents