System boot order check
After replacing a damaged/defective hard drive and prior to recovering the image from
the recovery DVD verify that the DOS boot order is as follows:
• CDROM
• Floppy drive
• Hard drive
Checking the PC BIOS
Step
1 Turn on or restart your PC. At the first DOS
2 Use the down arrow button to highlight
3 Press the Enter button.
4 Use the down arrow button to highlight
5 Press the Enter button.
6 Use the down arrow button to select
7 Press the Enter button.
8 Use the down arrow button to highlight
9 Press the Enter button.
10 Use the down arrow button to select
11 Press the Enter button.
12 Verify that the Third Boot Device is the
13 Press the Escape (Esc) button
14 Use the down arrow button to highlight
15 Press the Escape (Esc) button
16 Press the F10 button to save the changes.
17 Press the Enter button to Save to CMOS
E5505A Installation Guide
screen, press the Delete [DEL] key to enter
the CMOS setup utility screen.
Advanced BIOS Features
First Boot Device
CDROM
Second Boot Device
FLOPPY
hard drive (HDD-0)
Power Management Setup. Press the Enter
button.
and Exit
Notes
•
CMOS Setup Utility appears
•
Advanced BIOS Features appears
•
Selects the CDROM
•
Verify that the Power Supply Type is ATX.
5
Recovery
67