Reading And Resetting Of Data; Totals; Resetting Of The Totals; Resetting Of The Water Liters Total For Softener - Wega Polaris 1GR Use And Maintenance Manual, Instructions For The User

14

Reading and resetting of data

14.1 Totals

To view the total of the work performed by the
machine, proceed as follows:
Press the STOP/PROG. button of the right push-
button panel for at least 5 seconds until the
display shows the total number of selections
carried out;
by pressing the
STOP/PROG key
repeatedly (the
LEDs of different keys are turned on), you can
see the number of selections made by the corre-
sponding key;
to exit from the
total, repeatedly
press the STOP/PROG button until it returns to
selection mode.
i
After 10 seconds of inactivity the system
automatically exits from the menu.
User manual
TOTAL COFFEES
00000000
COUNTERS
00000000

14.2 Resetting of the Totals

To reset the totals of the individual dose buttons,
proceed as follows:
Press the STOP/PROG. button on the right push-
button panel and keep it pressed for at least 5
seconds;
Press the (-) but-
ton to start the
resetting;
to confirm the re-
setting, press the (+) button and keep it pressed
for 3 seconds.
The above-indicated procedure allows for the
i
carrying out of the resetting of the individual
selections, but not the total resetting of the
machine (life of the machine).
14.3 Resetting of the water liters total for
softener regeneration
Simultaneously press the(MODE
), (+ ) and (-
push-button panel until the message "00000 "
appears on the display;
to bypass regeneration control, set a value of
00000 litres.
Polaris
RESET COUNTING ?
PRESS + 3 SEC.
DATA RESET
),(ENTER
) buttons of the right
57