Data Reading And Programming; Main Menu; Counters - Wega WEGACONCEPT Series Instruction Manual

13

Data reading and programming

13.1 Main menu

To access the reading of machine data and the
programming of the main parameters, hold down
the ENTER key of the navigator key for at least 5
seconds.
The following messages will appear on the dis-
play:
To select the item concerned, use the () and
() keys.
To exit the menu, press the () or () key.
User manual

01 COUNTERS

02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
01 COUNTERS
02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
0.7 Bar Press 0.0
08:30 10-MAY-2010
Humidity 62% P 32%
13.2 Counters
In this section it's possible to display the number
of selections made (total and individual) as well as
the number of doser alarms.
Scroll through the menu until the item
"01 COUNTERS" is highlighted;
01 COUNTERS
02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
Confi rm the selection by pressing the ENTER key
and the display will show the following:
TOTAL COFFEES
00000
To display the partial strokes for the various types
of delivery, press the respective keys on the push-
button panel.
The selected key will light up, and the count of
selections made will appear on the display.
COUNTERS
00000
Wegaconcept
Total number of
selections made on the
machine.
Number of coff ee/hot
water selections made
on the machine.
19