KoamTac KDC Series User Manual page 120

KDC User Manual
DB Lookup Fields and Settings
Download DB to KDC - Downloads user created database to KDC.

Starting Quantity - Enter predefined start quantity for each scanned barcode. The

start quantity may be defined from 1 to 128 and may be adjusted using UP or
DOWN buttons.
Barcode Field - Select the position of barcode field in database from 1 to 4.

Stored Barcode Start Position - Select the numeric position of start substring

character of barcode in database from 1 to 39.
Scanned Barcode Start Position - Select the numeric position of start substring

character of scanned barcode from 1 to 39.
Comparing Barcode Length - Number of characters to be compared from 0 to 255

where 0 is all characters.
Display on KDC - Define database fields to be displayed on KDC. KDC may

display one to three fields. KDC will display one field in two or three lines, if same
field is specified in line entering option.
Figure 38 - DB Lookup Application Menu
A G
PPLICATION ENERATION
120