KoamTac KDC100 User Manual
Hide thumbs Also See for KDC100:
Table of Contents

Advertisement

REVISION
 
2.86F
 
 
 
 
User Manual KDC100 
December, 2009 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KDC100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KoamTac KDC100

  • Page 1 REVISION   2.86F         User Manual KDC100  December, 2009 ...
  • Page 2: Table Of Contents

    1. INTRODUCTION ........................... 8 1.1 KDC Package ............................9 1.2 KDC Characteristics ........................... 10 2. INSTALLATION ..........................12 2.1 KoamTac Installation Wizard ......................12 Windows XP ............................12 Vista and Windows 7 ..........................17 Windows Mobile 5.0+ ........................... 20 2.2 Manual Installation ..........................22 Windows XP, Vista, and 7 ........................
  • Page 3 KDC100 User Manual 4.3 Synchronization Settings ........................39 Destination of Data ..........................39 Synchronization Methods ........................40 Current KDC Wedge Method........................ 41 Synchronization Options ........................42 Application Options ..........................42 4.4 Barcode & KDC Settings ........................43 Select Symbologies and Symbology Options..................44 Data Editing Option ..........................
  • Page 4 KDC100 User Manual APPENDIX C - SPECIAL BARCODES ....................71 APPENDIX C - SPECIAL BARCODES ....................71 C.1 Set Symbologies ..........................71 C.2 Barcode Options ..........................74 C.3 Delete Last Scanned Barcode ......................76 C.4 Scan Options ............................77 C.5 Scan Timeout ............................. 78 C.6 Minimum Barcode Length ........................
  • Page 5: Listing Of Figures

    Figure 4 - Location of Scroll Buttons _____________________________________________________ 24 Figure 5 - KDC Display _______________________________________________________________ 25 Figure 6 - Reset Function for KDC200 - KDC200P - KDC300 __________________________________ 32 Figure 7 - Reset Function of KDC100 ____________________________________________________ 32 ® Figure 8 - KTSync Synchronizer Menu __________________________________________________ 34 Figure 9 –...
  • Page 6: Listing Of Tables

    Table 2 – Approximate Time to Charge KDC Battery ________________________________________ 23 Table 3 - KDC Menu Options ___________________________________________________________ 26 Table 4 – Factory Default Settings for KDC100 _____________________________________________ 30 Table 5 - Explanation of LEDs __________________________________________________________ 31 Table 6 - Troubleshooting Techniques ___________________________________________________ 58...
  • Page 7 No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KoamTac, Inc. The material in this manual is subject to change without notices. KoamTac reserves the right to make changes to any product to improve reliability, function, or design.
  • Page 8: Introduction

    Lightweight and compact, with a user-friendly design and superior functionality, KoamTac’s KDC works in a variety of portable applications. Use it independently or as an accessory to your PC, PDA, or smartphone. To find out more about KoamTac, Inc. and our family of products, visit us at www.koamtac.com.
  • Page 9: Kdc Package

    1.1 KDC Package The standard KDC package contains: 1. One KDC Barcode Data Collector 2. One USB Cable 3. One Neck Strap 4. KoamTac Installation CD with © KTSync for Microsoft Windows XP, Vista, 7 and Mobile 5.0+ KDC Device Driver User Manual 5.
  • Page 10: Kdc Characteristics

    Before you use your KDC, please become familiar with its physical characteristics. Refer to Figure 2 and Figure 3 below which indicate placement of scan and scroll buttons, OLED display, LEDs, and ports on your KDC. All KDC models are similar except for the KDC100 which includes an additional USB connector.
  • Page 11 KDC100 User Manual (KDC300) Figure 3 - Characteristics of KDC200 - KDC200P - KDC300...
  • Page 12: Installation

    2. Click Start icon then My Computer icon. A listing of devices on your computer will display including the disk drive containing the KoamTac Installation CD. 3. Click on the KoamTac Installation CD icon then click on the Setup directory. Click on the PC_Setup.exe file which executes the KTSync Setup Wizard.
  • Page 13 KDC100 User Manual Click Next icon in KTSync Confirm Installation window • Within a few minutes, installation of KTSync is complete. Click Close icon and wait for the Device Driver Installation Wizard to load.
  • Page 14 KDC100 User Manual Device Driver Installation Wizard Below are the screen images you will see during the installation of the KDC Device Driver. Click Next icon in Device Driver Installation Wizard window Click Continue Anyway icon in Software Installation Logo testing window...
  • Page 15 KDC100 User Manual Connect KDC to Computer Using the USB cable included with the KDC, follow the directions below. Connect the cable’s ultra mini USB connector to the KDC. Connect the cable’s Type A USB connector to your PC. Wait until your computer beeps and/or displays the message Found New Hardware.
  • Page 16 KDC100 User Manual Click Continue Anyway icon in Software Installation Logo testing window Click Finish icon in Found New Hardware Wizard window Verify COM Port Address User can verify installed COM Port in Device Manager...
  • Page 17: Vista And Windows 7

    2. Click Start icon then My Computer icon. A listing of devices on your computer will display including the disk drive containing the KoamTac Installation CD. 3. Click on the KoamTac Installation CD icon then click on the Setup directory. Click on the PC_Setup.exe file which executes the KTSync Setup Wizard.
  • Page 18 KDC100 User Manual Click Next icon in KTSync Confirm Installation window Click Close icon in KTSync Installation Complete window and wait for Device Driver Installation Wizard Click Install this driver software anyway in Windows Security window...
  • Page 19 KDC100 User Manual Click Finish icon in Device Driver Installation Wizard window Connect KDC to Computer Using the USB cable included with the KDC, follow the directions below. Connect ultra mini USB connector to the KDC. Connect Type A USB connector to your PC.
  • Page 20: Windows Mobile 5.0

    KDC100 User Manual Windows Mobile 5.0+ WARNING: PLEASE CONNECT PDA TO PC PRIOR TO INSTALLATION 1. PC_Setup.exe creates Mobile_Setup.exe file under C:\Program Files\KoamTac\KTSync\Windows.Mobile directory 2. Execute Mobile_Setup.exe Select Windows Mobile version to install. Click Next icon.
  • Page 21 KDC100 User Manual Click OK icon in Pending Application Install window Connect the PDA and follow the instructions on screen COM port Assignment Connect PDA and follow the instructions on screen User should assign a COM port for KDC before using pKTSync.
  • Page 22: Manual Installation

    KDC battery. Prior to using the KDC, KTSync software and KDC device driver must be installed on your computer. Using the USB cable included with the KDC, follow the directions below. NOTE: If you have the KDC100, it has two ports, Ultra Mini and standard Type A which swings out. See Figure 2 for more details.
  • Page 23: Operating The Kdc

    KDC100 User Manual 3. OPERATING THE KDC 3.1 Getting Started Attach Neck Strap to KDC To prevent possible damage to the KDC, we strongly recommend wearing it around your neck by the included neck strap. Also, please don’t swing KDC by the neck strap because contact with another object may cause it to malfunction or become damaged.
  • Page 24: Configure Kdc

    KDC100 User Manual Configure KDC The KDC is designed to meet the data collection requirements of many different industries in a variety of dynamic situations. To perform well in these diverse environments, the KDC is designed to be configured easily and quickly. But, to perform at its maximum level, the KDC must be configured properly.
  • Page 25: Basics

    KDC100 User Manual 3.2 Basics Reading Barcodes Reading a barcode is simple. Point the KDC at a barcode and press the scan button. Be sure to point the scan engine at the barcode, not at your face, and make sure to position the light beam on the barcode.
  • Page 26: Kdc Menus

    KDC100 User Manual 3.3 KDC Menus Top Menu Sub Menu Note Top Menu Sub Menu Note Wedge Only Normal Default KDC Mode Wedge & Store Application Custom Application Wedge / Store Store Only View Data View/Delete View/Delete Data Wedge & Store if Sent...
  • Page 27: Kdc Mode Menu

    KDC100 User Manual KDC Mode Menu The KDC Mode Menu has two options – Normal and Application modes. Normal: This is the default mode which provides basic barcode scanning. In Normal mode ® barcode data can be manipulated directly through the KDC or using KTSync during the synchronization process.
  • Page 28: Scan Options Menu

    KDC100 User Manual A.2 Code Options for a detailed explanation of each option. Scan Options Menu • Scan Angle: Allows you to configure the laser beam angle to the barcode. Wide is 54 and Narrow is 27 . The default is Wide.
  • Page 29: Data Editor Menu

    KDC100 User Manual User can select <NONE>, <CR>, <LF>, <CR+LF> or <TAB> as the termination character. Packet Data: KDC transmits packet data with checksum to minimize transmission errors. ® KTSync sets Data Format to Packet Data format upon execution. User may change Data Format to Barcode only if user prefers to use Barcode only mode but either KTSync program terminates abnormally or user disconnects KDC without exiting KTSync program normally.
  • Page 30 KDC100 User Manual Select the x characters from y position Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to Select Partial Data Length 0 means Select all characters from y position. Erase the x characters from y position Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to Erase Partial Data Length 0 means Erase all characters from y position.
  • Page 31: System Menu

    Scrolling – Enabled Partial Disp - Start 1, Length 0 GS1-128 CODE93 Data Process CODE35 Wedge/Store – Wedge & Store Always Data Format – Barcode Only Handshake- Disabled Terminator - <CR> + <LF> Table 4 – Factory Default Settings for KDC100...
  • Page 32: Led Status

    KDC100 User Manual 3.4 LED Status LED Color Status Successful Reading Green USB is connected and battery is fully charged Low battery Orange USB is connected and battery is charging No reading Empty battery Table 5 - Explanation of LEDs 3.5 Empty Battery...
  • Page 33: Reset Feature

    To reset the KDC, follow these steps. Connect the KDC to your PC. • KDC100 - Connect to your PC directly using the swing out, Type A USB connector. See Figure 7. • KDC200 / KDC200P / KDC300 - Connect to your PC using the included cable, attaching the ultra mini USB connector to your KDC and the standard, Type A connector to your PC’s USB port.
  • Page 34: Replace Battery

    KDC100. Replacement batteries can be purchased from a KoamTac distributor. Batteries should be disposed properly. Step One - Place KDC100 face down on a firm surface. On the back, locate the small black screw in the middle of KDC. This screw secures the battery cover.
  • Page 35: Synchronization

    KDC100 User Manual 4. SYNCHRONIZATION ® When barcode data is collected, it must be uploaded to your application. KTSync , which is bundled with the KDC, is software that allows barcode data to be uploaded to any PC, PDA, or smartphone running Windows XP, Vista, Windows 7, or Mobile 5.0+.
  • Page 36: Figure 9 – File Menu

    KDC100 User Manual computer during data synchronization. Bluetooth: This option is not available on KDC100. Exit: This option ends the KTSync program. You must re-run KTSync before you can synchronize data on the KDC. Figure 9 – File Menu Settings Menu Synchronization: Select Synchronize options.
  • Page 37: Figure 11 – Application Menu

    KDC100 User Manual Application Menu Generation: Create user application or download predefined application. Import: Import existing application. Import & Download: Import existing application and download into KDC. Export: Export created application. Figure 11 – Application Menu ® About Menu - KTSync - Version Information Figure 12 –...
  • Page 38: File Menu

    NOTE: You can manually assign the COM port using KTSync Connect option under the File menu. Synchronize Under the File Menu, this option allows you to manually synchronize data on KDC with host. This option is similar to clicking on the Synchronize button in the KoamTac Data Synchronizer box.
  • Page 39: Bluetooth

    KDC100 User Manual Bluetooth This menu option allows you to register up to ten Bluetooth devices including their MAC address, PIN #, and optional prefixes or suffixes to eliminate redundant manual data entry and automate Bluetooth connectivity to KDC. Figure 14 - Bluetooth Device Registry...
  • Page 40: Synchronization Settings

    KDC100 User Manual 4.3 Synchronization Settings ® KTSync provides several synchronization options for synchronizing data from your KDC to host devices such as your PC, PDA, or smartphone running Windows XP, Vista, Windows 7, or Mobile 5.0+. ® Figure 15 - KTSync...
  • Page 41: Synchronization Methods

    KDC100 User Manual Select from Current Running Application – This option allows you to select a currently running application for data synchronization. Note: • Data synchronization begins immediately if Automatically After Connection is selected. If not selected, data synchronization is started manually by the user.
  • Page 42: Current Kdc Wedge Method

    KDC100 User Manual KDC is connected to the host. IMPORTANT: Remember to configure all options properly before selecting this option. Data synchronization can be done manually by clicking the synchronize icon if this option is not selected. Beep while Synchronization You can enable or disable the beep tone during the synchronization process.
  • Page 43: Synchronization Options

    KDC100 User Manual Synchronization Options Synchronize KDC Time with PC Time when Connected This option enables you to synchronize the KDC date and time with the host date and time. Synchronization of date and time occurs after the data is uploaded to the host device.
  • Page 44: Barcode & Kdc Settings

    KDC100 User Manual 4.4 Barcode & KDC Settings ® KTSync allows you to configure the KDC Scan Options and Barcode Settings. The configurations ® options for the KDC using KTSync are similar to the Set Barcodes, Code Options, Data Editing and Scan Options on the KDC Menu.
  • Page 45: Select Symbologies And Symbology Options

    KDC100 User Manual Select Symbologies and Symbology Options The process for scanning and reading barcodes is delicate and complicated. Your KDC, though equipped with a high performance scan engine, if configured incorrectly, may not perform at its peak performance level. To ensure its high performance, the KDC comes configured to optimize its scan engine technology.
  • Page 46: Others Settings

    This feature is useful when moving from Bluetooth host device frequently. KTSync will automatically reconnect Bluetooth connection when you enter an effective Bluetooth network range. (Not Available on KDC100) To select any of these settings, click on the box to the left of the setting. A check mark (√) will display next to the setting to indicate that it is selected.
  • Page 47: Mobile Pktsync

    KDC100 User Manual 4.6 Mobile pKTSync For Mobile Device Use Only pKTSync provides limited functionality for Pocket PC 2003 and Mobile 5.0+ users. 1. Synchronization - Provides data upload functionality to your applications. 2. Keyboard Emulator - Allows scanned data to upload directly into your application as if the data were being entered manually on a keyboard.
  • Page 48: Application Generation

    KDC100 User Manual 5. APPLICATION GENERATION When you select Application menu from the KTSync, you can choose from the following four Applications – Generation, DB Lookup, Master/Slave, and Pick/BIN. User can also download saved programs using Import & Download option.
  • Page 49: Generate Application

    KDC100 User Manual 5.1 Application Generation KDC Application Generation tool is a robust feature that allows you to create custom applications for collecting and managing barcode data. To create a custom application, select the Generation submenu ® from the Application menu in KTSync Figure 21 –...
  • Page 50: Data Filter Settings

    KDC100 User Manual • Starting quantity Enter a predefined start quantity for each scanned barcode. The start quantity can be defined from 1 to 128 and is modifiable using up or down side key. • Waiting to scan Enter the number of seconds the KDC pauses before the user prompts display. During this timeout period, the user can modify the quantity.
  • Page 51 KDC100 User Manual • Barcode Type This field allows you to select the type of barcodes the KDC will collect. When you click on the box, Select Symbols is enabled. A listing of the symbologies supported by the KDC displays. To select a barcode symbology, click on the box associated with the symbology.
  • Page 52: Application Download And Execution

    KDC100 User Manual If this field is enabled, non-compliant data is NOT stored in the KDC. If this option is not enabled, non-compliant data is stored. Generate step 2 To include another step in your data collection process, click the box, Generate step 2. This step has the same options as Step 1.
  • Page 53: Predefined Applications

    KDC100 User Manual 5.2 Predefined Applications KTSync provides three Predefined Applications – Master/Slave, Pick/Bin, and DB Lookup. Master/Slave Master/Slave predefined application allows you to define a master barcode for comparison with one or more slave barcodes. The predefined application can be run once or continuously and within either setting, you can define a substring for comparison of master and slave barcodes.
  • Page 54: Figure 24 – Master/Slave Application Flow Chart

    KDC100 User Manual KDC Mode Collation : Define substring to be compared. Default is entire barcode Select MS Mode : Onetime (Onetime, Continuous Continuous ) Scan Master Scan Master Barcode Barcode Matched Scan Check Scan Check Mismatched Mismatched Matched Barcode...
  • Page 55: Pick/Bin

    KDC100 User Manual Pick/Bin The Pick/Bin predefined application is a special version of the Master/Slave predefined application. The Pick/Bin application allows you to define Pick ID and the barcode symbology for comparison with a defined Bin. Number of ID and Symbology Define Pick ID characters from 1 to 32 and the barcode symbology.
  • Page 56: Figure 26 – Pick/Bin Application Flow Chart

    KDC100 User Manual Exit to KDC Menu <Up>+<Down> User ID Scan User ID Valid User ID Defined Side Key Please Store User ID scan Pick data User Input Scan button Valid Barcode Please scan Bin data Ignore Scanned Pick Label...
  • Page 57: Db Lookup Application

    KDC100 User Manual DB Lookup Application The DB Lookup application allows you to download a database to the KDC which it can then utilize for advanced AUTO-ID applications like displaying additional data after scanning a barcode. For example, using our DB Lookup application, you could download a product database including information like description, price, and stock quantity.
  • Page 58: Figure 27 – Db Lookup Application Menu

    KDC100 User Manual Figure 27 – DB Lookup Application Menu...
  • Page 59: Troubleshooting

    Out of scan range Move scanner farther from the barcode Incorrect angle Change the angle of scanner to barcode Symbology Contact KoamTac - www.koamtac.com for possibility of Failed reading not supported custom symbology support Scan options Check scan option settings...
  • Page 60: Warranty

    KoamTac will not be liable in cases (i) in which the unit has been repaired or altered unless done or approved by KoamTac, (ii) in which the unit has not been maintained...
  • Page 61: Contact Information

    KDC100 User Manual 8. CONTACT INFORMATION CORPORATE HEADQUARTERS 116 Village Boulevard, Suite 200 Princeton, NJ 08540, USA PH: 609-734-4335 FAX: 609-228-4373 email: support@koamtac.com For more information, visit our website - www.koamtac.com...
  • Page 62: Appendix A - Barcode & Scan Options

    A.1 Symbologies KoamTac’s KDC products support most major barcode symbologies including 1D, 2D, Postal, and OCR- Fonts. Below is a list of the barcode symbologies supported by the KDC with respect to each models particular area of support.
  • Page 63: Table 8 - Add-On For Ean-13 Symbology

    KDC100 User Manual 13 and Bookland EAN are both enabled, Bookland EAN takes precedence. Bookland EAN does not have any options. The Bookland EAN barcode does not contain any groupings – that is, there are no hyphens or separators. Thus, the ISBN 957-630-239-0 is transmitted as 9576302390.
  • Page 64: Code Options

    KDC100 User Manual A.2 Code Options The KDC supports the following barcode options: Transmission of start and stop characters Reverse direction Symbology conversion Verification of optional check character Transmission of check digit Transmission of Start and Stop Characters For Codabar symbols you can choose not to transmit the start and stop symbols, the NOTIS Editing. By default, they are transmitted.
  • Page 65: Verification Of Optional "Check Digit

    KDC100 User Manual Verification of Optional “Check Digit” Code39 and Interleave 2 of 5 have an optional check digit, which, by default, is not verified. Their verification can be enabled by selecting the option VerifyCheckDigit to true or you can enable the verification for individual symbologies.
  • Page 66: Resolution Of Inconsistencies

    KDC100 User Manual Resolution of Inconsistencies Three types of inconsistencies could arise in the assignment of symbology options. The decoder has pre- defined strategies to resolve these inconsistencies: If UPCE_as_EAN13 is true, then UPCE_as_UPCA is ignored. If symbology conversion is selected but the target symbology is not enabled, then the decoder still outputs the symbol in the target symbology.
  • Page 67: Miscellaneous Barcode Information

    KDC100 User Manual A.3 Miscellaneous Barcode Information Height of a Linear Barcode Industry standards suggest a height of either 6.5mm or 15% of the symbol length, whichever is greater. Symbols of less than recommended heights may cause recognition problems. Check Characters Yes, we recommend the use of check-characters in barcodes.
  • Page 68: Equation To Determining Potential Number Of Stored Barcodes

    KDC100 User Manual Equation to Determining Potential Number of Stored Barcodes The number of barcodes that can be stored in the KDC memory depends on the size of the barcodes. Example: If only UPCA barcodes are scanned and the check digit is not transmitted, then each barcode takes up 11 (barcode data) + 2 (added bytes) + 2 (length and type) + 4 (time stamp) = 19 bytes.
  • Page 69: Appendix B - Faq

    Appendix B – FAQ B.1 Symbology Q: What barcode symbologies are supported by the KDC100? A: The KDC100 supports most major 1D barcode symbologies. Below is a list of the1D symbologies supported by the KDC100. KDC300 KDC100 / KDC 200 / KDC200P...
  • Page 70: Host Interface

    A: The battery on the KDC100 can be charged at least 300 times before it needs to be replaced. Q: How long does it take to charge the KDC100 battery? A: It takes about 2 hours to fully charge the KDC100 from an empty battery status to a fully charged status.
  • Page 71: Programming

    Q: Does KoamTac provide customization services for the KDC100? A: Yes. Custom applications or projects can be developed by KoamTac engineers. This service is provided for an additional fee to KoamTac. For more information regarding this service, please contact KoamTac.
  • Page 72: Appendix C - Special Barcodes

    KDC100 User Manual APPENDIX C - SPECIAL BARCODES C.1 Set Symbologies Enable EAN-13 Disable EAN-13 Enable EAN-8 Disable EAN-8 Enable UPCA Disable UPCA Enable UPCE Disable UPCE Enable Code39 Disable Code39 Enable ITF-14 Disable ITF-14...
  • Page 73 KDC100 User Manual Enable Code128 Disable Code128 Enable Interleave 2 of 5 Disable Interleave 2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35...
  • Page 74 KDC100 User Manual Enable Bookland EAN Disable Bookland EAN Enable EAN-13 Supplements Disable EAN-13 Supplements Enable EAN-8 Supplements Disable EAN-8 Supplements Enable UPCA Supplements Disable UPCA Supplements Enable UPCE Supplements Disable UPCE Supplements...
  • Page 75: Barcode Options

    KDC100 User Manual C.2 Barcode Options Codabar - do NOT transmit start/stop Codabar - transmit start/stop Convert UPCE to UPCA Do NOT convert UPCE to UPCA Convert EAN8 to EAN13 Do NOT convert EAN8 to EAN13 Convert UPCE to EAN13...
  • Page 76 KDC100 User Manual VerifyCheckDigit Do NOT VerifyCheckDigit Verify check digit for I2of5 Do NOT verify check digit for I2of5 Verify check digit for Code39 Do NOT verify check digit for Code39 Return check digit for I2of5 Do NOT return check digit for I2of5...
  • Page 77: Delete Last Scanned Barcode

    KDC100 User Manual Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8 Do NOT return check digit for EAN8 Return check digit for EAN13 Do NOT return check digit for EAN13 C.3 Delete Last Scanned Barcode...
  • Page 78: Scan Options

    KDC100 User Manual C.4 Scan Options Reversed Scan Normal Scan Wide scan angle Narrow scan angle High filter mode Normal filter mode...
  • Page 79: Scan Timeout

    KDC100 User Manual C.5 Scan Timeout Timeout = 500msec Timeout = 1sec Timeout = 2sec Timeout = 3sec Timeout = 4sec Timeout = 5sec Timeout = 6sec Timeout = 7sec Timeout = 8sec Timeout = 9sec Timeout = 10sec...
  • Page 80: Minimum Barcode Length

    KDC100 User Manual C.6 Minimum Barcode Length Minimum Length = 2 Minimum Length = 3 Minimum Length = 4 Minimum Length = 5 Minimum Length = 6 Minimum Length = 7 Minimum Length = 8 Minimum Length = 9 Minimum Length =...
  • Page 81 KDC100 User Manual Minimum Length = 14 Minimum Length = 15 Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23...
  • Page 82 KDC100 User Manual Minimum Length = 29 Minimum Length = 30 Minimum Length = 31 Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36...
  • Page 83: Security Level

    KDC100 User Manual C.7 Security Level Security level = 1 Security level = 2 Security level = 3 Security level = 4...
  • Page 84: Data Process - Wedge/Store

    KDC100 User Manual C.8 Data Process - Wedge/Store Wedge Only Wedge & Store Store Only Wedge & Store if Sent Wedge & Store if Not Sent...
  • Page 85: Data Process - Data Format - Handshake

    KDC100 User Manual C.9 Data Process - Data Format - Handshake Data format - Barcode only Data format - Packet data Enable Handshake Disable Handshake...
  • Page 86: Data Process - Termination Character

    KDC100 User Manual C.10 Data Process - Termination Character None CR+LF...
  • Page 87: System

    KDC100 User Manual C.11 System Memory Status Reset Memory Date/Time Battery Version Button Lock Button Unlock Enable Auto Menu Exit Disable Auto Menu Exit...
  • Page 88 KDC100 User Manual Enable Port Status Disable Port Status Time & Battery Type & Time Type & Battery Memory Status Enable Scrolling Disable Scrolling Factory Default...
  • Page 89: Sleep Timeout

    KDC100 User Manual C.12 Sleep Timeout Disable 1sec 2sec 3sec 4sec 5sec 10sec 20sec 30sec 1min 2min 5min 10min...
  • Page 90: Function

    KDC100 User Manual C.13 Function...
  • Page 91: Number

    KDC100 User Manual C.14 Number...
  • Page 92: Lower Case Alphabet

    KDC100 User Manual C.15 Lower Case Alphabet...
  • Page 93 KDC100 User Manual...
  • Page 94 KDC100 User Manual...
  • Page 95: Upper Case Alphabet

    KDC100 User Manual C.16 Upper Case Alphabet...
  • Page 96 KDC100 User Manual...
  • Page 97 KDC100 User Manual...
  • Page 98: Control Character

    KDC100 User Manual C.17 Control Character Space...
  • Page 99: Symbol Character

    KDC100 User Manual C.18 Symbol Character “ & ‘...
  • Page 100 KDC100 User Manual < >...
  • Page 101 KDC100 User Manual...
  • Page 102 KDC100 User Manual Start-String Stop-String Note: • You can compose a string up to 16 characters. • A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. • The KDC will abort string composition if you do not scan “Stop-String”...
  • Page 103: Index

    KDC100 User Manual INDEX Angle ......26, 28 Full ......... 32, 58 Resolution ......66 barcode scanner ....8 Handshake ..... 26, 29 Scan 26, 28, 35, 42, 44, 58, 61 Battery ....23, 30, 87, 88 High ......26, 28, 29 Security ......

This manual is also suitable for:

Kdc200pKdc200Kdc300

Table of Contents