KoamTac KDC Series User Manual page 58

KDC User
YOUR
Note
KDC20/100/200/250/300/350L/410/415
KDC30/350C/420/425
AIM ID - Enables the user to add AIM ID to scanned data, which may then be stored

in the KDC or wedged to the host. AIM ID must be defined in the Data Format
menu section of KTSync. AIM ID is added to the end of a Prefix or Suffix.
Partial Data: Enables the user to store and/or transfer partial data. The user defines

the start position and number of characters to be stored and/or transferred.
 Select the
 Set Partial Data Start Position to
 Partial Data Length
 Erase the
 Set Partial Data Start Position to
 Partial Data Length
KDC
The user may also delete or display a current suffix by scanning the following
special barcodes.
x
characters from
Action to Select
0
x
characters from
Action to Erase
0
Delete Suffix
Display Suffix
Delete Suffix
Display Suffix
y
position
y
, Partial Data Length to
selects all characters from
y
position
y
, Partial Data Length to
erases all characters from
x,
Partial Data
y
position.
x,
Partial Data
y
position.
58