Bt Service - KoamTac KDC20 User Manual

For more detailed information regarding Bluetooth functionality with the KDC, please
refer to Chapter 4. BLUETOOTH.
ConnectDevice: Users can choose Bluetooth device type

Options - HID normal (KDC20)
- HID iOS (KDC20)
- SPP2.0
- SPP(KDC20/20i)
- iPhone (KDC20i)
Auto Connect : Enabled or Disabled

Auto Reconnect: Enabled or Disabled (iPhone, HID iOS, HID normal mode)

Auto Power On: Enabled or Disabled

PWR On Time: Disabled, 1 to 10 seconds

Auto Power Off : Enabled or Disabled

Beep Warning - Enabled or Disabled

PWR Off Time - 1 to 30 Minutes

PowerOff Msg – Enabled or Disabled

MAC Address – 12 characters

FW Version – Display

Wakeup Nulls – Enabled or Disabled

Autolock Time – 0, 1, 2, 3, 4, 5, 10, 15 minutes

BT Toggle – Enable or Disable HID soft keyboard or iPhone mode

connection On/Off toggle.
BT Disconnect Button – Enable or Disable Bluetooth disconnection by

pressing down button for 3 seconds.
HID AutoLock - Disabled, 1, 2, 3, 4, 5, 10, 15 minutes

HID Keyboard – English, German, French, Spanish, Italian

HID Initial Delay- Define the initial delay between 1 second to 10 seconds

before data transmission in HID mode
HID Inter-character Delay - Define the inter-character delay between 10msec

to 100msec in HID mode
HID Control Character - Map control characters to either ALT+Numlock or

^+Character.

3.3.6 BT Service

Power : Turning on or off Bluetooth Power

Options – Enable/Disable
Pairing Mode

- KDC enters pairing mode so that host
Bluetooth
MAC Address
Bluetooth
Firmware Version
Bluetooth
41
KDC User Manual
device can search KDC.
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.