KoamTac KDC Series User Manual page 107

KDC User Manual
Data Edition
Attach Serial Number

The KTSync will add a KDC serial number to barcode data. This option is enabled
by default and maynot be disabled.
Attach Time Stamp

The KTSync would add timestamp to barcode data. This option is enabled by
default and maynot be disabled.
Attached Barcode Type

The KTSync would add barcode type to barcode data. This option is enabled by
default and maynot be disabled.
Serial Number

When Attach serial number is enabled, this option determines when to attach serial
number. "Start of record" means to attach at the front of record and "End of
record" means to attach to the end of record.
Data Order

This option specifies the order of data (Barcode Type, Barcode Data and
Timestamp) in the record.
Data Delimiter

This option is used to select a character to be added between barcode data, serial
number and timestamp and/or barcode type. User may select one of the following:
None, Tab, Space, Comma and Semicolon as the data delimiter. The Comma is
selected as the data delimiter by default.
Record Delimiter

This option is used to select a character to be added at the end of the barcode
record. The user may select one of None, CR, LF, TAB, and CR&LF as the record
delimiter. The CR&LF is selected as the record delimiter by default.
Other Options
Non-English Keyboard

This option is used when the barcode data has non-English characters and a non-
English keyboard.
S
YNCHRONIZATION
107