KoamTac KDC Series User Manual page 67

KDC User
YOUR
Beep Alert
Beep Sound: Enables or disables KDC beep sound.

Power On Beep: Enables or disables beep sound when KDC power is on.

Beep On Connect: Enables or disables beep sound when KDC is connected to the

host.
Beep On Scan: Enables or disables beep sound when KDC is scanning.

Beep Volume
This option enables the user to adjust the beep volume from High to Low.
MFi Mode (KDC20i, 30i, 200i, 250i, 300i, 350i, 400i)
This option Enables user to enable or disable MFi mode. MFi mode supports SPP and MFi
Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID normal.
Vibrator
Enables or disables KDC vibrator.
Auto Exit
This option enables KDC to automatically exit KDC Menus.
Port Status
This option enables users to enable or disable KDC port messages.
Display Format
There are various selection of display format; Time & Battery, Type & Time, Type & Battery,
Memory Status and Barcode only.
Menu Barcode
This option enables users to enable or disable Honeywell special barcodes (KDC300/350C
only).
Scrolling
This option enables users to enable or disable display scrolling for a barcode with more than
40 characters.
Brightness
This option enables users to adjust brightness of display.
Factory Default
By selecting this option, users may reset KDC options to factory default settings.
KDC
67