KoamTac KDC Series User Manual page 29

KDC User Manual
Note: 2D image-based barcode readers such as the KDC30, KDC300, KDC350C, and
KDC420 series models may read barcodes that have been printed QR barcodes that are
on a LCD screen.
Laser scanners such as the KDC20, KDC100, KDC200, KDC350L, and KDC410 series
models are not designed to read barcodes from a LCD screen and will only read
printed barcodes.
4.
Connect the KDC to the host device by scanning the Bluetooth MAC Address Barcode.
Figure 6 - Connecting KDC with a smart phone by scanning Bluetooth MAC Address Barcode
5.
Open KTSync after it has been installed, and it will automatically find the KDC and
connect. (Refer to 2.2 KOAMTAC Installation Wizard for more information about installing
KTSync)
Settings
Tap on Bluetooth
Tap on Pair
Installation
Scan the BT MAC Address
Barcode
Complete!
29