KoamTac KDC Series User Manual page 63

KDC User
YOUR
Power Mode: The user may choose the type power consumption for the GPS

function.
 Users may extend the battery life of the KDC350 in Power Save mode.
 Users should use normal mode if accurate GPS data is required.
 The KDC350 will last about 15 hours in normal non-bypass data mode and 18
hours in power save non-bypass data mode.
 The KDC350 will last about 7 hours in normal bypass data mode and 8 hours in
power save bypass data mode.
Bypass Data: Enabled or Disabled

 This option should be disabled if users wish to record the GPS data with a
scanned barcode data.
 The KDC350 will bypass GPS data to the host if the bypass option is enabled.
 The KDC350 becomes a Bluetooth GPS receiver if this bypass data option is
selected.
Acquire Test: Time test to see how long it takes to acquire GPS signal.

Reset GPS: Reset GPS parameters

GPS Hot Key
The KDC350 provides the following hot keys for convenient GPS operations:
GPS Power Enable

 If Auto Power Off is enabled and GPS power is disabled, users may turn on the
GPS power by pressing the SCAN button.
 Users should hold the SCAN button for more than 3 seconds to turn on the
GPS power.
GPS Bypass mode Enable/Disable

 If GPS power is enabled, users may toggle GPS Bypass mode by pressing the
SCAN button.
 Users should hold the SCAN button for more than 3 seconds to toggle GPS
bypass mode.
GPS Acquire Test Cancellation

 Users may cancel the GPS acquire test by pressing the SCAN button during the
test.
GPS Data Append Cancellation

 Users may cancel GPS data append by pressing SCAN button if GPS data is not
available immediately.
 Users should hold the SCAN button for more than 3 seconds to cancel GPS
data append.
KDC
63