KoamTac KDC Series User Manual page 28

KDC User Manual
2.
On the host device, go to Settings -> Bluetooth, and select the KDC that needs to be
paired. The KDC and host device will now communicate with each other.
3.
After it has been installed, open KTSync and it will automatically find and connect to the
KDC. (Refer to 2.2 KOAMTAC Installation Wizard for more information about installing
KTSync)
Option Two: Connect the host device from the KDC by scanning a Special
Bluetooth MAC Address barcode
This method is recommended for advanced users or when the application or process requires
the pairing of multiple KDCs to multiple host devices on a regular basis.
1.
Find the Bluetooth MAC Address of the host device.
2.
Create the Bluetooth MAC Address Barcode according to the format below.
Bluetooth MAC Address:
Barcode Type (Symbology): Code 128
Contents: For KDC20/200/250/410/415, type
Options: includetext parsefnc
3.
Print the Bluetooth MAC Address
Settings
Tap Bluetooth
Settings
Tap on General
Figure 5 - Finding Bluetooth MAC Address
1234567890AB
For KDC30/300/420/425, type
Tap the KDC
Tap on About
^FNC3651234567890AB
SYNMCRKDC651234567890AB
Installation
Bluetooth address
28