KoamTac KDC Series User Manual page 110

KDC User Manual
the custom application. Below is a description of each field. These prompts are the same
when selecting Generate step 2 and Generate step 3.
The custom application may include only Step 1.
First line

Enter up to 13 characters; these will display on the first line of the KDC.
Second line

Enter up to 13 characters; these will display on the second line of the KDC.
Starting quantity

Enter a predefined start quantity for each scanned barcode. The start quantity
may be defined from 1 to 128. Use the up or down side key to choose the
desired quantity.
Waiting to scan

Enter the number of seconds the KDC pauses before the user prompts display.
During this timeout period, the user may modify the quantity. If this field is set to
zero, the quantity field may not be adjusted. This field may be defined from "-1"
to "30" seconds. "-1" second enables infinite waiting of user quantity input.
Enable data filter

Check this box to enable the data filtering option. Data filtering enables the user
to predefine different aspects of the barcode data the user are collecting.
A G
PPLICATION ENERATION
110