Table of Contents
Advertisement
2.5
Adjusting hose length and connecting intermediate cable
Figure 2.9
Connect the hydraulic hoses carefully and adjust their lengths. This will assure that the hoses are
always connected correctly and that the drill is operated using practised lever manipulations. Once
work is completed, insert and fasten the quick connectors in the hose holder's key-shaped open-
ings.
Figure 2.10
Remove the protective cover (A) on the intermediate cable on the drill and connect the cable to
the Control Station. Be very careful when making this connection. Make sure that the pins of both
connectors are aligned. Then lightly press the connectors together while securing the connectors
with the nut. When unhitching the implement, screw on the protective cover on the intermediate
cable.
Ver.3 29.06.2007
A
RDA 400-450 S
15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
