Emptying The Seed Hopper - Vaderstad RAPID RDA 400 S Instructions Manual

Seed drill
Hide thumbs Also See for RAPID RDA 400 S:
Table of Contents

Advertisement

Instructions and settings
2.17.2
Filling from small sacks
Pay attention to safety. Do not walk under a suspended load! Make sure there is nobody on
NOTE!
the drill when feeding the seed. Make sure there is nobody on the hopper. Avoid contact with and
inhalation of seed disinfectant.
Figure 2.48
NOTE!
The stepping boards and platform of the drill are not designed for manual loading from
small seed bags.
Filling should preferably be done using a loader and the bags placed on a pallet.
Lift the pallet diagonally from the front right, with the tractor turned away to the side, up to the
guard rail level in order that one can safely access the platform.

2.18 Emptying the seed hopper

Figure 2.49
The hopper can be emptied by a single action. Remove the sliding hatch completely. If emptying
a bit at a time, slide the hatch up gradually.
Do not forget to replace the hatch after emptying.
36
Ver.3 29.06.2007

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rapid rda 450 s

Table of Contents