Vaderstad RAPID RDA 400 S Instructions Manual page 41

2.21.1 Functional description
1 Main switch
2 Master stop (all feeding stops and "STOP" is displayed on the 3rd and 4th row)
3 Calibration
4 Not used
5 LCD display
6 Tramlining indicator lamps
Off = No tramlining
Green light = Tramlining and correct operation
Red light = Incorrect tramlining
7 - Auto advance block. The indicator lamp next to the button lights when the block is engaged.
- Selection of tramlining programme (Keep the push-button pressed for 5 seconds)
8 Manual advance of tramlining.
9 Indicator lamps for active bout markers.
10 Manual selection of bout markers. Both in/left out/right out/both out.
11 - Automatic bout marker change left/right. The indicator lamp next to the button lights when
automatic operation is engaged.
- Manual change of bout marker.
12 Information. Used to explain alarm conditions, to check the trip meter, average speed, etc.
13 Enter
14 Escape
15 Selection of low-lift or full lift. The indicator lamps next to the button show which function has
been engaged. The left indicator lamp blinks when the low-lift switch has been engaged.
16 Lift stop Used to operate bout markers without raising the machine from the furrow.
17 Selection dial. Use the dial to page through the menus. Selections are shown against a dark
background. Use
of the selected item. Confirm the value/selection with
When entering digits, the speed of change upwards/downwards can be increased by keeping
depressed while turning the dial.
18 Shut-off of seed feeding
19 Not used
20 Not used
Ver.3 29.06.2007
to confirm a selection and then use the dial to select or change the value
RDA 400-450 S
.
41