Vaderstad RAPID RDA 400 S Instructions Manual page 5

RDA 400-450 S
INTRODUCTION
Väderstad Rapid A 400-450 S is a high-capacity cultivation drill. The Rapid drills can be
used under a large variety of conditions, from "direct drilling" to sowing straight after the
plough. This versatility is made possible by the drill's coulter system design and its unique
depth control system, amongst other features.
The machine can be fitted with different types of pre-implements to suit varying farmland
conditions.
IMPORTANT!
This instruction manual is based on experience and results obtained during development of
the Rapid series of drills. Hints and guidelines are to be regarded as general advice, entail-
ing no responsibility whatsoever on the part of Väderstad-Verken AB and/or its represent-
ative. All responsibility for usage, road transport, maintenance and repair etc. of the drill
rests with the owner/driver.
Local conditions affecting crop sequence, soil type, climate etc. may require procedures
different to those mentioned in this manual.
The owner/operator shall bear full responsibility for correct use of the drill at any given
time.
Väderstad drills have passed quality assurance tests and operational tests prior to delivery.
The user/purchaser shall retain sole liability for ensuring that the equipment functions cor-
rectly when in use. In case of complaints, please refer to the "General delivery conditions
of the Väderstad group".
DECLARATION OF EU CONFORMITY
in accordance with the EU machine directive 98/37/EEC, attachment 2 A
Väderstad-Verken AB, P. O. box 85, 590 21 Väderstad, SWEDEN
hereby declare that drills as below have been manufactured in conformity with Council
directive 98/37/EC and standard EN-1553.
RDA 400 S and RDA 450 S with manufacturing number 12 800 - 16 000.
Ola Byström
Ver.3 29.06.2007 5