Instructions and settings
2.16.2
Scale
Figure 2.44
Weigh calibrations as follows:
1 Press Start/Reset.
2 Hang the empty calibration bag on the scale hook.
3 The weight of the bag is shown. Wait until "Hold" is displayed.
4 Press Start/Reset.
5 Remove the bag and fill it with the calibrated amount.
6 Weigh the filled bag. The scale now shows the net weight of the calibrated amount.
! The scale is switched off automatically after approximately 5 minutes. (1 min. for certain
scales)
! Keep the scale in the calibration box while driving.
! Check the scale against a known weight at regular intervals and always before the start of the
season.
34
2.24
Figure 2.45
Hold
KG
Ver.3 29.06.2007