Inspecting The Drill's Towing Eyelet - Vaderstad RAPID RDA 400 S Instructions Manual

2.2

Inspecting the drill's towing eyelet

Min. 24 mm
Min. 24 mm
Figure 2.3
Drills not fitted with an intermediate packer have a reversible and replaceable towing eyelet. The
A side of the towing eyelet is intended for connecting to a hitching hook, while the B side is in-
tended for connecting an agricultural tow bar. Be sure to replace the towing eyelet when it has
been worn down. The figure shows the minimum recommended dimensions. Also inspect the
bolted joint of the towing eyelet.
NOTE! Incorrect towing eyelet welding may drastically reduce its durability. We always recom-
mend regular replacement of the towing eyelet!
Ver.3 29.06.2007
A
RDA 400-450 S
B
11