Instructions and settings
2.16 Calibration, hydraulic feed output
1 Set the seed box. See "2.14 Seed box setting with hydraulic feed output" on page 27.
Figure 2.37
2 Use the enclosed bag for calibration. Prior to calibration, reset the scale with the bag empty.
Push the bag into the seed box from below through the spring-loaded door.
Figure 2.38
3 Switch off the hydraulic fan by turning the lever to position B.
4 Start the tractor and switch on the hydraulic connector used for driving the fan and feed output.
30
B
A
Ver.3 29.06.2007