Status; Network Statistics - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Status

The pages of this section display data on the current state of the access point:

network statistics

•
IP addresses leased by the DHCP server
•
the routing table
•
data on devices connected to the access point's network and its web-based interface
•
active sessions
•
addresses of active multicast groups.
•
Network Statistics
On the Status / Network statistics page, you can view statistics for all connections existing in
the system (WAN connections, LAN, WLAN). For each connection the following data are
displayed: name and state (when the connection is on, its name is highlighted in green, when the
connection is off, its name is highlighted in red), IP address and subnet mask, gateway (if the
connection is established), MAC address, MTU value, and volume of data received and transmitted
(with increase of the volume the units of measurement are changed automatically: byte, Kbyte,
Mbyte, Gbyte).
Figure 51. The Status / Network statistics page.
Page 64 of 158
Configuring Device