Firmware Upgrade - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the access point and
configure the automatic check for updates of the device's firmware.
!
Upgrade the firmware only when the access point is connected to your PC via a wired
connection.
The current version of the access point's firmware is displayed next the D-Link logo in the top left
corner of the page.
By default, the automatic check for the device's firmware updates is enabled. If a firmware update is
available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, deselect the
Check for updates automatically checkbox and click the Apply settings button.
To enable the automatic check for firmware updates, in the Remote update section, select the
Check for updates automatically checkbox and click the Apply settings button. By default,
in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is
specified.
You can upgrade the firmware of the access point locally (from the hard drive of your PC) or
remotely (from the update server).
Figure 116. The System / Firmware upgrade page.
Page 148 of 158
Configuring Device