D-Link DAP-1155 User Manual page 60

DAP-1155 Wireless N150 Access Point & Router
User Manual
On the next page, you can specify an individual name (SSID) and security settings for the
point or disable the device's wireless network broadcast.
Figure 48. The page for changing the settings of the wireless local area network.
If you want to use the access point's wireless network to connect devices, leave the Enable
checkbox selected. Then, if needed, specify another name for the network in the SSID field (use
digits and Latin characters).
It is strongly recommended to configure the secure wireless network of DAP-1155. To do this,
select the Protected value from the Network Authentication drop-down list and enter a key (a
password that will be used to access your wireless network) in the Network key field. Use digits
and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed
authentication type is specified for the
On the next page, the parameters of the network to which you want to connect, the entered
password, and the settings of the wireless network of the
the specified settings are correct and then click the Apply button. After that, the wireless channel of
DAP-1155 will switch to the channel of the wireless access point to which you have connected.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
After clicking the Apply button, the
point's WLAN. Click the Next button.
access
access point
Home / Information
Page 60 of 158
are displayed. Make sure that
page opens.
Configuring Device
access