D-Link DAP-1155 User Manual page 62

DAP-1155 Wireless N150 Access Point & Router
User Manual
Parameter
Private port (begin)/
Private port (end)
Private IP
Remote IP
Enable NAT Loopback
When needed settings are configured, click the Apply button.
After clicking the Apply button, a dialog box appears.
If you are going to create a new virtual server, click the OK button. After clicking the button, the
Firewall / Virtual servers page opens (see the Virtual Servers section, page 134, for a detailed
description of the elements from the page).
If you are not going to create a new virtual server, click the Cancel button. After clicking the
button, the Home / Information page opens.
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (begin) field and leave the
Private port (end) field blank.
Enter the IP address of the server from the local area network. To
choose a device connected to the
select the relevant value from the drop-down list (the field will be
filled in automatically).
Enter the IP address of the server from the external network.
If the checkbox is selected, users of the
access the server, which IP address is specified in the Private IP
field, using the access
address. If a DDNS service is configured on the Advanced /
DDNS page, the users can access the server via the device's domain
name.
Page 62 of 158
Description
access point's LAN at the moment,
access
point's external IP address as the server's IP
Configuring Device
point's LAN can