D-Link DAP-1155 User Manual page 139

DAP-1155 Wireless N150 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
MAC address
Action
Activate
After specifying the needed parameters, click the Apply button.
To edit a rule for filtering, click the link to the relevant rule. On the opened page, change the needed
parameters and click the Apply button.
To remove a rule, select the checkbox located to the left of the relevant line in the table and click
the Delete button. Also you can remove a rule on the editing page.
Figure 109. The page for adding a rule for the MAC filter.
The MAC address of a device from the access point's LAN. You can
enter the MAC address of a device connected to the access point's
LAN at the moment. To do this, select the relevant device from the
drop-down list (the field will be filled in automatically).
Select an action for the rule.
Deny: Blocks access to the access point's network for the device
with the specified MAC address.
Allow: Allows access to the access point's network and to the
Internet for the device with the specified MAC address when the
rules on the Firewall / IP filters page block access for this device.
If the checkbox is selected, the rule is enabled. Deselect the
checkbox to disable the rule.
Page 139 of 158
Description
Configuring Device